Lowes Picnic Table/Bench Build Video (Time Lapse)

Lowes Picnic Table/Bench Build Video (Time Lapse)

Build video of the Lowes pine 6ft Picnic Table/Bench. Very good value @ under $90 bux.(Seems to cost more putting together hardware/wood than the cost of this kit) If you're buying it unassembled as I did....look on the bottom of the packaging, that will be your tables top....so, try and find one with the least knots...etc. Around the 0:40 mark notice I had the brace on the inside of the legs and had to switch it to the outside.(Just a tip to watch out for)

Kobalt tool bench unboxing and set up! (Silver/chrome)

Kobalt tool bench unboxing and set up! (Silver/chrome)

https://m.lowes.com/pd/Kobalt-45-in-W-x-36-in-H-3-Drawer-Wood-Work-Bench/50109238?cm_mmc=SCE_PLA-_-ToolsAndHardware-_-ToolStorage-_-50109238:Kobalt&CAWELAID=&kpid=50109238&CAGPSPN=pla&store_code=2505&k_clickID=76c4abdf-65ae-43be-bf34-7b97bf51f8f0&gclid=EAIaIQobChMI1OWpkd-t2AIVTCWBCh2PGwz9EAQYASABEgJbWPD_BwE This is an overview of the Lowes Kobalt item 538510 45 X 36 inch wood workbench that includes 3 drawers and pegboard for tool storage.

Outdoor Planter Bench

Outdoor Planter Bench

Build this custom planter bench that adds an interesting twist to any outdoor space. The bench is a basic build. Start with the back frame which is two posts, a cap, and a series of rails. Flip the frame and add the front rails. You'll also add the cable rail where you'll attach the wires used to hold the planters. Build the front frame of the bench by adding the front and back rails to the legs. Join the two frames using the shelf connectors and the seat connectors. Then you can install most of the slats for the bench shelf and the seat leaving these spots open to attach the wire ropes. With the bench built, it's time to install the clever planters. These are actually pieces of duct work I found in the heating and cooling aisle and when you open them up a little and attach these duct caps using machine screws. Either paint or leave them 'natural'. Next, drill the small holes on each end that you'll use to wire the planters onto the bench. The wire ropes that hold the planters are secured at the bottom of the bench, and at the top so start at the top and thread the wires through the eye screws and secure them with these wire clips. Mark the height your first planter will hang at. Put some tension on the wire, and mark the measurement with some tape. Thread the wire through the holes, and shimmy your planter up and into place. Use a couple more of these wire clips to secure them, then repeat the whole process for the remaining two planters. To secure the bottom, you pull the wire right through the openings in the bench, and using the wire clips again, secure it to the eye screws just like you did at the top. That's it! Install the final slats, add plants, and enjoy. For the detailed directions, go to http://www.lowes.com/creative-ideas/porch-deck-and-patio/vertical-planter-bench/project Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes

How to Make a Pipe Bench

How to Make a Pipe Bench

Get that great industrial look with this easy to make bench. Get instant industrial style with this super simple bench. Pulled together from pipes and a panel, make this super stylish industrial bench. Industrial's in and this bench is a great way to incorporate it into almost any space. Find project details here: http://low.es/208U5ov Start by creating the base. Clean your pieces up with some mineral spirits before you start, and then you're basically just making two 'H' shapes. Find the exact diagram for the pieces and parts in the detailed directions. This is really simple, you don't need any special tools because the pipes truly just twist together. Once you have the two 'h's' join them with a span of long pipe and that produces a base. You may need to make some little adjustments to make sure it sits level, and then you can leave the pipes 'natural', or give the whole base a coat of spray paint. It's time for the bench. Have Lowe's cut two pieces of MDF to size, and then glue those together. Next, glue a couple of supports lengthwise..and you really can just eyeball this, no special measurements; they're just to make the bench a little sturdier. Use some painters tape to hold the supports in place to dry. The padding for the cushion is plain old carpet pad. Cut four layers to size, and then you want to give those a little trim holding your scissors at a 45-degree angle. That'll create a beveled edge so the seat doesn't look so square and boxy. Stack the layers of padding and the MDF onto some drop cloth -- trim that so that it's about 6-inches larger than the bench. You don't want all this colorful padding to show through your final fabric, so the drop cloth makes a nice sturdy barrier. You want a good taut cover on the bench. Pull one side of the drop cloth into place and staple it. Pull the opposite side into place -- nice and tight, and secure it. Now you can do the two ends and then just work your way down each side, pulling tight and stapling. For neat and tidy corners, it's just like wrapping a present. Pull the middle in and secure it, then fold in one side -- and staple it. Then the other side. See? Nice and neat. If you want to trim off any excess you can, or you can just staple it down. Once the drop cloth is in place, repeat the process with a fabric you like...this is actually a drapery panel from Lowe's -- it's a great inexpensive choice with a lot of style. Put the base onto the bench, and attach it with screws -- and that's it! For more Creative Ideas check us out on Lowe's.com Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes

How to Install Laminate Countertops

How to Install Laminate Countertops

Installing laminate countertops is the last step in this series to update your kitchen. For detailed instructions on this diy laminate countertops project, click here: http://low.es/1ppvo3O For Lowe's Installation services: http://low.es/1qlqfyV Learn how to install kitchen cabinets in this series: Cabinet prep video:http://bit.ly/1A5nUJF Hanging cabinets: http://bit.ly/1CpLiFG Installing base cabinets: http://bit.ly/1xaGjbP For more ideas to improve your home, check out Lowe's How-To Library or our other social media channels: Lowe's - http://www.lowes.com/how-to-library Facebook - http://www.facebook.com/lowes Twitter - http://www.twitter.com/lowes Pinterest - http://www.pinterest.com/lowes Instagram - http://www.instagram.com/loweshomeimprovement Subscribe to Lowe's YouTube: http://bit.ly/1blLmvD or head to our channel: http://www.youtube.com/Lowes

The Weekender: "The Retro Gym" (Season 3, Episode 7)

The Weekender: "The Retro Gym" (Season 3, Episode 7)

FACT: A throwback-styled home gym increases the chances of your new 2018 fitness goals sticking. Products: Pergo laminate flooring - http://low.es/2mcFzAX Accent bench - http://low.es/2mjiayV Multi-color coat rack - http://bit.ly/2qJFydw Cabinet pulls - http://low.es/2CVSCCh Wall mirror - http://low.es/2mfJ36Q Daewoo mini fridge - http://low.es/2EqOtCi Kid's table & chairs set - http://bit.ly/2Ep9yNy Kid's throw rug - http://low.es/2CHEdoX Wall fan - http://low.es/2maKmTG Bookcase/reading nook - http://bit.ly/2AKcGBj Piping for weight rack - http://low.es/2maTyHz Balance railing - http://low.es/2kbPXLs Railing brackets - http://low.es/2Dd9AIW Luxury hand towels - http://bit.ly/2AJJIlf Paint colors: "Shade Grown" (HGSW6188) "Antiquarian Brown" (SW0045) "Aloe" (SW6464) "Riverway" (SW6222) "Red Barn" (SW7591) Subscribe to Lowe's YouTube: http://bit.ly/1blLmvD or head to our channel: http://www.youtube.com/Lowes For more ideas to improve your home, check out Lowe's How-To Library or our other social media channels: Lowe's - http://www.lowes.com/how-to-library Facebook - http://www.facebook.com/lowes Twitter - http://www.twitter.com/lowes Pinterest - http://www.pinterest.com/lowes Instagram - http://www.instagram.com/loweshomeimprovement

How to Build a DIY Dining Table & Benches

How to Build a DIY Dining Table & Benches

Learn how to build a beautiful dining set with these step by step instructions. Find project details here: http://low.es/1N3xio0 Assemble your table base upside down on a flat surface. After cutting your aprons and legs to size and drilling pocket holes, attach a long and short apron to one leg. The outside face of the leg and the outside face of the aprons should be offset by about 1/4 inch. Use glue and pocket hole screws to secure the parts. Add a second leg to the short apron, followed by the remaining long apron. When those have been secured, add the remaining legs and short apron. Flip the table upright and cut 4 corner braces that will reinforce the leg joint. Glue the braces in each corner and secure with screws. Drill pilot holes and drive screws and washers into each leg. Cut the stretchers to length, drill pocket holes, and install between the long aprons by attaching with pocket screws. Cut the top slats to size, sand, and apply stain and clear finish. Place the two scrap boards in the floor and place the top slats with the best face down on the scraps. Make sure the ends are flush. Center the table base on the slats and secure them with pocket screws. Complete the table by adding furniture glides to the bottom of the legs. To make the bench, make the end assemblies by cutting a 6 degree angle on the top ends of the legs. Place them on your bench with a 1/4 inch spacer between the legs. Center the leg brace on the legs with the bottom flush and trace the angles of the legs onto the brace. Remove the brace, cut the top shape with the jig saw, center the brace back on the legs and secure with screws. Secure a stretcher to one of the leg assemblies with glue and screws. Add the remaining leg and stretcher. Cut the seat slats, sand and finish. Position the first slat on the bench. Secure with pocket screws. Add the second seat slat and screws. For more ideas like this harvest table and bench, visit http://www.LowesCreativeIdeas.com/ Watch more how to videos like this at http://www.Lowes.com/Videos Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes

The #1 Tool Every Man Must Have!!

The #1 Tool Every Man Must Have!!

What is the most important tool a man can have. GET YOUR IRWIN VISE FOR ONLY $20 HERE!!!! https://goo.gl/Oig4rw This Link will direct you to our Amazon Affiliate Link. Stay tuned for more videos about homesteading, sustainable living, permaculture, off-grid living and modern homesteading. SUBSCRIBE: http://bit.ly/2btWfQR WATCH MORE WRANGLERSTAR: “Recent Uploads” - https://goo.gl/Y1bFko "How To" - https://goo.gl/uFp1fu "Back To Basics" - https://goo.gl/Ghfpbe "Family Vlogs" - https://goo.gl/s8sjTL "Wildland Firefighting" - https://goo.gl/z5yj1v "MY FAVORITE TOOLS" - http://www.wranglermart.com "Our New Book" - http://www.masterbooks.com/wranglerstar/ "Contact Wranglestgar" - wranglerstardiy@gmail.com "Wranglerstar Web Store" - http://www.wranglermart.com Wranglerstar Shirts: http://wranglerstar.spreadshirt.com/ SOCIAL NETWORKS Tumblr: http://wranglerstar.tumblr.com/ Instagram: https://instagram.com/mrwranglerstar/ Facebook: https://www.facebook.com/wranglerstar1 Twitter: https://twitter.com/wranglerstar

Tips to Install a Mudroom Storage Bench

Tips to Install a Mudroom Storage Bench

Here are simple tips on how to install a mudroom bench with storage from Lowe's. Get the detailed plan on Lowes.com: http://low.es/1jx2kKq Learn more about planning a mudroom in your home on Lowes.com: http://low.es/1okEVwl For more ideas to improve your home, check out Lowe's on other social media channels: Facebook - http://www.facebook.com/lowes Twitter - http://www.twitter.com/lowes Pinterest - http://www.pinterest.com/lowes Instagram - http://www.instagram.com/loweshomeimprovement

How to Install a Bench Vise

How to Install a Bench Vise

In this video I'll show you how to properly install a bench vise. The vise I'm installing is an Irwin vise I purchased at Lowes. Here's the link http://www.lowes.com/pd/IRWIN-5-in-Vise/50168505

Top Videos -  loading... Change country
Load 10 more videos
 
 
Sorry, You can't play this video
00:00/00:00
  •  
  •  
  •  
  •  
  •  
  •  
  •  
CLOSE
CLOSE
CLOSE