Be careful with 18650 battery connector holder boxes!

Be careful with 18650 battery connector holder boxes!

There are many offerings from eBay that will allow you to use multiple 18650 batteries in a homemade experiment or whatnot, but sometimes the manufacturers of these holders are too cheap to use the proper plastic mold to show the CORRECT orientation of placing the cells. While in a series connected holder, you would simply negate the voltage from of the two connected cells by placing a cell backwards,, but when you connect a cell backwards in a parallel holder, that makes a DEAD SHORT. In easy terms, don't assume the molded battery orientation shown on the holder is correct. Carefully examine the holder to see how it's wired. In addition, a parallel connected holder is not something you dare place in a kid's toy, unless you want to try your homeowner's insurance. ---------------------------------------------------------------------------------- Cube Computer on Facebook: https://www.facebook.com/CubeComputerCompany BikeGeekMTDX on YouTube: https://www.youtube.com/bikegeekmtdx Comment Policy: http://www.facebook.com/notes/cube-computer-company/443253722390844

Solderless 18650 Battery System by Vruzend.com

Solderless 18650 Battery System by Vruzend.com

FAQ: 1) Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook 2) Where can I buy Lithium Batteries https://j35.us/Lithium-July 3) How can I Consult 1on1 with you? https://j35.us/PhanTime 4) Where Can I buy Solar Panels? http://j35.us/100w-100-solar 5) Where can I buy a Battery Management System? https://kit.com/jehu/battery-management-system 6) What parts do you use on your Samba? https://j35.us/eSambaProj 7) What is the best fuse wire? I only use 1/8w resistor legs http://j35.us/ResistorLegs 8) Why not use Supercapacitors? A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically. ******************************************************************************** Music: Elyon - Roses - https://youtu.be/5YyEdgYRgMM Xad - Story - https://youtu.be/YeHNoPcF_Wo ******************************************************************************** Follow me on Instagram http://j35.us/insta-jag35 Follow me on Twitter http://j35.us/twitter-jag35 Follow me on Facebook http://j35.us/Facebook-JehuGarcia ******************************************************************************** If you would like support our project and help me make videos, you can donate: http://j35.us/helpwithcash or you can become our patron https://www.patreon.com/jehu ******************************************************************************** sponsors http://j35.us/jag35-2016 http://gabvwkey.com http://j35.us/indiespot-2016 http://evwest.com http://www.rode.com/products ********************************************************************************

█ How To Make a Battery Holder at home █

█ How To Make a Battery Holder at home █

How to Make a Battery Holder for 18650 or AA Batteries at home In this easy Instructions/tutorial I show how to make a Homemade DIY Battery Holder Box Batteries Mounts from scrap materials it's very easy to make and super cheap. You can prepare any size and type of batteries you need . You will need: long nose-pliers, a knife, a piece of cardboard, 2 safety pins, cable, hot melt glue, scissors.

DIY Lead-Acid to Lithium-Ion battery conversion 18650

DIY Lead-Acid to Lithium-Ion battery conversion 18650

well my favorite battery died on me, so i decided to refit it with old 18650 cells that i have laying around. and now i finally have a use for those old cells too. right now it's running at 8v and as i add more battery cells i'll cahnge the voltage to whatever works best. i plan on using a voltage step-up transformer with it to run whatever i need. this Duralast battery was from my greatgrandparents 1981 Mercury Zephyr (witch i got and may convert to electric someday) and its one of the first batteries i really messed with when i was younger. so since it's helped me so much i'll help it back by refitting it with a more useful battery chemistry. the song is from Jersey Devil for the Playstation 1.

Vape Battery Safety: How to properly install vape mod battery 18650 SMOK AL 85 Alien Baby

Vape Battery Safety: How to properly install vape mod battery 18650 SMOK AL 85 Alien Baby

How to install 18650 battery for the smok al 85 alien baby vape mod.

Cordless Screwdriver battery replacement/upgrade

Cordless Screwdriver battery replacement/upgrade

Cordless Screwdriver battery replacement/upgrade Replacing 600mAh industrial batteries with 2500mAh rechargeable

DIY Adapter/convert a 3-AAA batteries to a Li-Ion battery 18350/25500/26650 lithium cell

DIY Adapter/convert a 3-AAA batteries to a Li-Ion battery 18350/25500/26650 lithium cell

Simple way to make converter from 3-AAA batteries into the Li-Ion battery 18350. Use protection board like my video earlier https://www.youtube.com/watch?v=yqSbP5nt1_Q ⚑ SUPPORT CHANNEL: ❄ PayPal: ➥ https://paypal.me/xvoland ❄ Patreon: ➥ https://www.patreon.com/xvoland WHERE TO BUY: Shop: http://s.click.aliexpress.com/e/buZFyfqJq Electronics: http://s.click.aliexpress.com/e/emuRNj23F Li-ion Rechargeable 18350 900mAh: http://s.click.aliexpress.com/e/jeq7iEuvv Li-ion Rechargeable 2pcs 18350 1200mAh: http://s.click.aliexpress.com/e/urFyvRBMJ Li-ion Rechargeable 18650 - 4pcs (big): http://s.click.aliexpress.com/e/VzN7AqJ6u Cell protection board: http://s.click.aliexpress.com/e/bAm2RfaQ3 Cell protection board (10pcs): http://s.click.aliexpress.com/e/Vj66MNVVR Una manera sencilla de hacer convertidor de baterías de 3 AAA en el 18350 de la batería de Li-Ion. Utilice Paneles de protección como mi video anterior Une façon simple de faire convertisseur de 3 piles AAA dans la batterie Li-Ion 18350. Utiliser un panneau de protection comme ma vidéo plus tôt Einfache Möglichkeit, Umsetzer von 3-AAA-Batterien in die Li-Ion Akku 18350 zu machen. Verwenden Sie Schutz Bord wie meine früheren Video

How to open laptop battery without destroying it. Disassembly laptop battery HP. In description...

How to open laptop battery without destroying it. Disassembly laptop battery HP. In description...

How to open laptop battery without destroying it. Disassemble laptop battery HP. Good 18650Li Ion 3200mAh Cells: http://ali.pub/23jmrj Power Bank up to 21000mAh from Laptop Battery. Power Bank from old Laptop Battery. Cheap 0.86$ Power Bank: http://ali.pub/23jmwz Aluminum 1.20$ Power Bank: http://ali.pub/23jn0v Aluminum case 3 battery 1.86$ http://ali.pub/2qby9o Aluminum case 4 battery 2$ http://ali.pub/2qbyg3 Two Battery 1.5$ Power bank: http://ali.pub/23jn6p 6 Battery 2 USB Power Bank: http://ali.pub/23jndp 5 Battery 3 USB Power Bank: http://ali.pub/23jniy 8 Battery 2 USB Power Bank: http://ali.pub/23jnos High quality screwdriver http://ali.pub/1okmn2 You can help me to support my projects: On PATREON: https://www.patreon.com/2013ElectronicsComputers Bitcoin Wallet: 14AvQMLkvFvG3tnkpLnn328xsfxp3udH8R Web Money: WMZ Z290955088799

THE CIGGO TATTOO 75W SINGLE BATTERY BOX MOD

THE CIGGO TATTOO 75W SINGLE BATTERY BOX MOD

The CigGo Tattoo is a 75 watt mod that features an amazing engraving, a full length hidden LED screen, temperature control operation and is powered by a single 18650 cell. From a design perspective, the mod is very similar to the popular Praxis Banshee 150W, but with a more portable form factor. The Tattoo has a rubberized finish, features durable stainless steel at the bottom and has dimensions of 88mm x 26.5mm x 42.8mm. The front and back of the device have a beautiful Angel wing engraving for a premium look. To attach atomizers to the mod, there’s a 510 threaded connection at the top. The control face is located on the side of the device and is built with two adjustment buttons at the bottom and a firing button at the top. On the opposite side of the mod, you will see the unique LED display that spans the entire length of the device. The Ciggo Tattoo utilizes a single 18650 battery to fire at up to 75 watts of output. The device can be powered in temperature control mode with nickel and titanium coils, but only works with stainless steel heads in power mode. The temperature range is from 200 and 600 degrees Fahrenheit and can be adjusted in increments of 10°F. The mod’s resistance level bottoms out at 0.05ohm, ensuring compatibility with virtually every atomizer out there. The battery compartment is accessed from the bottom via a door that flips open. The cover features clear indicators for polarity to ensure batteries are always inserted correctly. There is no on-board charging technology, so an external charger is needed to top off the 18650 battery. Features & Specs. Dimensions: 88mm x26.5mmx 42.8mm Weight: unknown Stainless steel at bottom Rubberized finish Amazing design with angel wing engraving Available colors: black Full length LED display 510 threaded connection Uses single 18650 battery Bottom loaded battery compartment Power output range: 1W to 75W Temperature control output range: 200F to 600F or 100℃ to 315℃ Adjustable in increments of 10℉ or 5℃ Highest discharge current: 20A Product link: https://www.ciggo.com/tattoo.html OFFICIAL ADRIAN LO DEJAVU ACCOUNT!!! -Facebook: http://www.facebook.com/adrianlodejavu -Instagram: http://www.instagram.com/adrianlodejavu -Youtube: http://www.youtube.com/adrianlodejavu -Snapchat: http://Adrianlodejavu EJUICE: http://www.instagram.com/electricksejuice

36V Lithium Ion Bicycle Battery Unboxing

36V Lithium Ion Bicycle Battery Unboxing

This is an unboxing of a the 36V Lithium Ion Bicycle Battery

Top Videos -  loading... Change country
Load 10 more videos
 
 
Sorry, You can't play this video
00:00/00:00
  •  
  •  
  •  
  •  
  •  
  •  
  •  
CLOSE
CLOSE
CLOSE